I love the way this simple egg box Halloween bunting turned out. So simple and effective.
You will need …
Three egg boxes, some black and white paint, glue, glue gun if you have one or tape, scissors, string or ribbon, googly eyes and a paint brush.
1. Cut the lid and the side tab off your egg box.
2. Take the base of the egg box and cut it into three pieces as shown in the photo. Then cut each of those pieces in half again.
3. You will be left with six pieces. Take the two end pieces and put them to one side. You will be able to make another bat from them which I will put in a separate blog post.
4. Trim the edges of the remaining pieces to form the ghost and bat silhouettes Make the edges rounded for the ghost and sharp n’ pointy for the bat. You will get two of each out of each egg box.
5. Paint the bats black and the ghosts white on both sides. Depending on the colour of your egg carton you may need to do a few coats of white paint. If you have grey egg boxes you could leave them unpainted.
I prefer to use thick poster paint as it doesn’t make the egg carton so wet and dries with a matt finish. The white is lovely as it’s an old-fashioned white/dirty white rather than a brilliant white which works really well for this bunting.
6. When the paint is dry add the eyes. I chose to stick googly eyes on the bat and paint the ghosts face but you could googly eye both.
7. Measure out a length of twine or ribbon and using a glue gun (you could use tape) carefully glue the twine to the back of alternate bat and ghosts. You need to glue the twine at the top or they will tip forward. Leave about half a bat/ghost sized space in between each one.
This is a great craft that all the family can help make.